Owning a car certainly has its ups and downs. One of the major problems that most car owners face is that they do not know some of the basics. The fact is, there are certain things that every car driver should be aware of. Some things are common knowledge – and others should be common knowledge. In an ideal world, none of us would need to go to the mechanic except in very rare circumstances. However, the truth is that most of us could do with learning a thing or two about our vehicles. But what are the things that you should be aware of? There are some essentials which most drivers could benefit from knowing a little about. Let’s take a look at the top things you should get to know about regarding your vehicle.
Changing A Tyre
This is one of those tasks which seem to have achieved almost legendary status owing to its apparent difficulty. The fact of the matter is, changing a tyre is a surprisingly easy and simple task. However, there are a few things to bear in mind if you want to make it as flawless an experience as possible. Most people panic when they feel a tyre go flat and pull over immediately. However, this is not always your best option. For example, if you are on the motorway, then this could be incredibly dangerous. It is usually better to travel to a decent location first, even if it means going very slowly with your hazards on. Then, it is a matter of putting the car into gear and putting the handbrake on. To change the tyre, you need to jack the car up at the jack point closest to that tyre. Then it is quite a simple affair. Just unscrew the lug nuts and take the tyre off. Put it in the boot of the car so it is safe – do not leave it on the road. Replace with the new tyre, and tighten. Done right, this should only take a few minutes.
Checking Tyre Pressure
Checking your tyre pressure is actually very simple, but many people don’t do it often enough. This can be dangerous behaviour, as it can lead to a car which does not handle well. Most gauges are pretty much the same. First remove all the dust caps from the wheels. Then, attach the gauge to each in turn. To find out what pressure they should be, look in your manual. If you haven’t got your auto manual, look here: www.tradebit.com Then it is a simple matter of changing the pressure and keeping the gauge there until it is correct. This should take no longer than five minutes.
Jump-Starting A Car
As soon as you know that the battery really is what is at fault, you know you need to jump-start the car. This process is actually quite simple, and there are plenty of descriptions of it in auto manuals to go by. For now, however, we will go through the basics. Obviously, you will need your jump cables and the healthy car to use to jump-start yours. The most important thing is keeping the positive and negative together when you attach the cables. Start the good car, and then – hopefully – the other one will soon spring to life. For more advice, look here: http://www.rd.com/advice/